ARTCOL is a revolutionary wood adhesive made with German know-how which has excellent bonding strength. ARTCOL is highly recommended for bonding Wood, Laminates, Plywood, Veneer, Block-board, Hardboard, MDF etc. The joints made with ARTCOL are extremely strong and are every carpenter’s delight.


A properly seasoned and chemically treated wood should be used and must be dust and grease free. Surfaces should be machined to a perfect matching. Apply a thin coat of ARTCOL evenly on both joining surfaces with the help of a roller, brush or spatula and then moderately press the glued surfaces and ensure uniform contact and even spreading of glue.


Active Matter Polyvinyl Acetate Emulsion
pH 5-7
Dilution 10% can be done but not necessary as it is ready for use
Pressing Time 8-10 hours
Appearance Milky White
Shelf Life Best within one year from the date of manufacturing
Storage Store in a cool dry place. Keep container tightly closed when not in use

Storage and Handling:

  • Avoid Direct Sunligh
  • Keep container tightly closed a use.
  • Store in cool place at temperatureween 5-30°C.
  • Any skin/film formation should be removed before use.


ARTCOL is available in:

  • Boxes 50gm, 125gm, 250gm, 500gm
  • Plastic Pails 1kg, 2.5kg, 4kg, 10kg, 20kg and 25kg
  • HDPE barrels 50kg and200kg

The above information given is based on the present state of our knowledge and experience. The statements mentioned herein should be considered as information without obligation. For applications, users should make their own assessment of our product under their awn conditions according to final requirements. No liability exceeding the value of our product can be derived from the foregoing statements. If local regulations exist, they should be applied